Welcome to Worldia, we have over 25 years of expertise.
Home / Products / PCD Tools / PCD Turning / PCD Turn boring bars for internal machining

Worldia - Polycrystalline Diamond (PCD) Turn boring bars for internal machining

Model: Customized
Brand: SUPOWER / WORLDIA
Availability: 20~30days
Place of origin: Beijing,WORLDIA
Capacity(Monthly): N/A
Online Inquiry PDF Format
Description Material Introduction
 
APPLICATIONS
 
WORLDIA PCD turn boring bars are tipped with the ultrahard cutting materials PCD or CVD-D. Bore diameters from 1mm can be bored using our PCD/CVD equipped carbide boring bars.45° inclination  and transverse pin structure of Shaft allows you to accurately set the tool for operation in just a few seconds.
 
  • Aluminum and aluminum alloys 
  • Copper, brass and bronze alloys 
  • Zinc and magnesium alloys 
  • Carbon Fiber
  • Epoxy resins 
  • Plastics
  • Fiberglass composites 
  • Graphite composites 
 
 
                                     
PRODUCT USAGE
 
According to grain size and features of diamond,four types of PCD material,
i.e PD01E / PD10E / PD32E / CVDD are listed as below. 
 
 
P        
M        
K        
N
S        
H        
Material PD01E PD10E PD32E CVDD
 
MATERIAL INTRODUCTION
 
Material Grain size Features Application
PD01E 1 PD01E fine grain size PCD material(1μm) is suitble for finishing applications.Its high impart resistance and high abrasive resistance are no less than that of rough grade of PCD. PD01E has excellent chip resistance is suitable for the roughing and interrupt cutting aluminium alloys.This grade is also commonly used for non-ferrous finishing applications.Other successful applications include machining of wood,MDF.
PD10E 10 PD10E is the universal grade in the market.It`s the first choice for many applications where a good balance of toughness and wear resistance are required. This Grade is commonly used for non-ferrous finishing applications.Other successful applications include machining of wood,MDF.The machining of low-medium content silicon aluminium alloys,carbide,hard rubber,graphite and so on.
PD32E 2-30 PD32E has a unique combination of wear resistance,edge strenth and edge quality.It contains a carefully sorted mix of micron diamond(Between 2 - 30 μm).The combination of these particle sizes and a specifically developed high pressure sintering process produces a structure with extreme abrasion resistance and good thermal stability. Application areas include the machining of abrasive workpiece such as MMC,high silicon aluminium alloys as well as for the machining of carbide,hard rubber,graphite and other applications.
CVDD - CVDD is a pure carbon material without binder with extreme abrasion resistance and good thermal suitability.Due to its perfect cutting edge suitable fro appications where mirror finishes are required. Application areas include the machining of abrasive workpiece such as MMC,high silicon aluminium alloys as well as for the machining of carbide,hard rubber,graphite and other applications.
Hi! What is your idea today?
WORLDIA 8618618272087
Nina +86 15631662072
google-site-verification=0STkOZEvYuoDp-D40AVfMUk--CzM2AsZv24S6ISPdmk